| After-sales Service: | Support After-Sales |
|---|---|
| Warranty: | 1-3 Years |
| Material: | PE |
| Kind: | Color Plastic Sheet |
| Water Absorption: | ＜0.01% |
| Contraction Percentage: | ＜0.4% |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
PE rod is an amazing polyethylene plastic material , which can replace carbon steel , stainless steel , bronze and many other materials .
HDPE offers resistance to almost all acids and bases, detergents and hot water.
Because PE rod has good insulation propety , so it is easy to weld .
PE ROD's working temperature is from -50 ºC to 90 ºC.
HDPE rods is a high crystallinity, non-polar thermoplastic resin, milky white translucent waxy solid, with good chemical stability, can resist most of the acid, alkali, organic solution corrosion, good electrical insulation, easy to weld.
1. Chemical Engineering: Corrosion and wear resistantance mechanical parts
2. Thermal power: coal handling, storage of coal, warehousing chute lining
3. Coal processing: sieve plate, filter, U-underground coal chute
4. Concrete: cement raw and finished product silo silo lining
5. Grain: food storage or chute lining
6. Mining: sieve plate, chute linings, wear anti-bonding part
7. Food industry: starshaped wheel, transmission timing bottle screw, bearings, guide rollers, guides, slide blocks, etc
8. Some kind of rubber fender panels and front face of rubber fender.
2000X1000X(10-200)MM
3000X1500X(10-200)MM
3050x1220x(10-200)mm
4000X2000X(10-200)MM
5000X1300X(10-200)MM
| Property | Unit | Value |
| Density | g/cm3 | 0.92-0.96 |
| Average molecular weight | g/mol | 3million-10million |
| Tensile strength(23ºC in air) | MPa | 22 |
| Breaking strength | Mpa | 42 |
| Tensile strain at break | % | 600 |
| Charpy impact strength(notched) | mJ/mm2 | No break |
| Ball indentation hardness | N/mm2 | 42 |
| Shore D hardness | -- | 65-70 |
| Abrasion | % | 70-80,steel=100 |
| Static Friction Coefficient | -- | ≤0.16 |
| Kinetic Friction Coefficient | -- | ≤0.01 |
| Water Absorption | -- | NIL |
| Elongation at break at 23 degress | % | ≥300 |
| Temperature resistance | ºC | -269 to +85 |
| Melt Temperature | ºC | 130-140 |
We offer excellent sliding properties and abrasion/wear resistance due to its low coefficient of friction. HDPE Sheet is very tough and impact resistant, even at low temperatures, it is lightweight, easy to weld but difficult to bond. As a thermoplastic sheet manufacturer in China, Abosn can supply both single color and Dual-color HDPE sheets to suit customer demands. We own the most advanced Extrusion machines to extrude HDPE sheets with fixed material under certain pressure and temperature. HDPE Sheet has an almost waxy feel to it and is pretty good at being a low friction wear strip material and is used probably more than any other plastic as a wear strip on conveyors or production lines of huge companies. While it is difficult to bond effectively to anything, which means that HDPE Sheet will need to be physically or mechanically fixed in place using screws etc.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}