| After-sales Service: | Support After-Sales |
|---|---|
| Warranty: | 1-3 Years |
| Material: | PE |
| Kind: | Color Plastic Sheet |
| Water Absorption: | ＜0.01% |
| Contraction Percentage: | ＜0.4% |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
UHMW-PE Fender pads and fenders are produced by a sintering process either from virgin or from reclaimed material (aprox. 70% reclaimed +30% virgin material - also named double-sintered or blended UHMW-PE).
UHMW-PE (UltraHighMolecularWeight-PolyEthylene) combines highest strength with wear resistance and consequently provides the best durabilty of all available Polyethylene products.
The UHMW-PE Fender pads advantages are:
Very high impact strength
Very low friction coefficient
Very high abrasion resistance
UV + Ozone resistant
Non-conducting (optional)
100% recycable, non-rottening
Cut to size sheet ,all size is available with us
Standard colour :Black ,Yellow ,Blue ,Green ,Red,White ,other colour is available upon request .
| Property | Unit | Value |
| Density | g/cm3 | 0.92-0.96 |
| Average molecular weight | g/mol | 3million-10million |
| Tensile strength(23ºC in air) | MPa | 22 |
| Breaking strength | Mpa | 42 |
| Tensile strain at break | % | 600 |
| Charpy impact strength(notched) | mJ/mm2 | No break |
| Ball indentation hardness | N/mm2 | 42 |
| Shore D hardness | -- | 65-70 |
| Abrasion | % | 70-80,steel=100 |
| Static Friction Coefficient | -- | ≤0.16 |
| Kinetic Friction Coefficient | -- | ≤0.01 |
| Water Absorption | -- | NIL |
| Elongation at break at 23 degress | % | ≥300 |
| Temperature resistance | ºC | -269 to +85 |
| Melt Temperature | ºC | 130-140 |
The UHMW-PE Fender pads application is as follows:
low resistance sliding plates on fender panels
low resistance slinding panels for bridge and pier protection
corner protection for offshore structures, berths and other marine facilities
We offer excellent sliding properties and abrasion/wear resistance due to its low coefficient of friction. HDPE Sheet is very tough and impact resistant, even at low temperatures, it is lightweight, easy to weld but difficult to bond. As a thermoplastic sheet manufacturer in China, Abosn can supply both single color and Dual-color HDPE sheets to suit customer demands. We own the most advanced Extrusion machines to extrude HDPE sheets with fixed material under certain pressure and temperature. HDPE Sheet has an almost waxy feel to it and is pretty good at being a low friction wear strip material and is used probably more than any other plastic as a wear strip on conveyors or production lines of huge companies. While it is difficult to bond effectively to anything, which means that HDPE Sheet will need to be physically or mechanically fixed in place using screws etc.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}