Customization: | Available |
---|---|
After-sales Service: | Support After-Sales |
Warranty: | Support After-Sales |
Still deciding? Get samples of US$ 5/kg
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Abosn HDPE ground protection mat
Abosn's ground protection mats are designed to protect soft or sensitive ground conditions for the safe passage of machinery and heavy vehicles.
Made of 100% virgin material, our road mats can be reused many times and are 100% recyclable after use. It is truly environmentally friendly, green and pollution-free.
It is the best alternative to expensive aluminum protection systems, will never rot and is the best alternative to wood. Our products are mainly used by ground engineering companies, outdoor activity companies, landscaping contractor
Four pattens you can Choose
Standard size |
2000X1000mm, 3000X1500mm, 2440X1220mm, 2440X610mm, Maximum width:2400mm 2900X1100mm, 3000X2000mm, 4000X2000mm |
Factor | virgin HDPE | Resistance to Ultra-violet | Poor |
Tensile Strength(MPa) | 22 | Radiation resistance | Fair |
Notched Impacted Strength Kj/m2 | No break | Dielectric constant@1MHz | 2.3-2.4 |
Elongation at break (%) | >100% | Dielectric strength(KV/ mm) | 22 |
Acids-concentrated | Good--Fair | Dissipation Factor@1MHz | 1-10*10 |
Acids-dilute | Good | Surface resistivity(Ohm/sq) | 10 |
Aromatic hydrocarbons | Fair | Volume resistivity(Ohm-cm) | 10-10 |
Greases and Oils | Good-Fair | Water absorption-over 24 hours (%) |
<0.01 |
Halogenated Hydrocarbons | Fair-Poor | Density(g/cm) |
0.93-0.97 |
Halogens | Fair-Poor | Alkalis |
Good |
Ketones | Good-Fair | Alcohols |
Good |
We offer excellent sliding properties and abrasion/wear resistance due to its low coefficient of friction. HDPE Sheet is very tough and impact resistant, even at low temperatures, it is lightweight, easy to weld but difficult to bond. As a thermoplastic sheet manufacturer in China, Abosn can supply both single color and Dual-color HDPE sheets to suit customer demands. We own the most advanced Extrusion machines to extrude HDPE sheets with fixed material under certain pressure and temperature. HDPE Sheet has an almost waxy feel to it and is pretty good at being a low friction wear strip material and is used probably more than any other plastic as a wear strip on conveyors or production lines of huge companies. While it is difficult to bond effectively to anything, which means that HDPE Sheet will need to be physically or mechanically fixed in place using screws etc.
Q: Are we a source factory or a trading company?