| After-sales Service: | Support After-Sales |
|---|---|
| Warranty: | 1-3 Years |
| Material: | PE |
| Kind: | Color Plastic Sheet |
| Water Absorption: | ＜0.01% |
| Contraction Percentage: | ＜0.4% |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Polyethylene materials are semicrystalline materials with excellent chemical resistance, good fatigue and wear resistance, and a wide range of properties (due to differences in length of the polymer chain.)
Polyethylene materials are easy to distinguish from other plastics because they float in water.
Polyethylene materials provide good resistance to organic solvents, degreasing agents and electrolytic attack.
They have a higher impact strength, but lower working temperatures and tensile strengths than polypropylene.
They are light in weight, resistant to staining, and have low moisture absorption rates.
1. UHMW exhibits virtually no water absorption
2, Non-Toxic
3. Low coefficient of friction
4. Corrosion resistant
5. Abrasion and impact resistant
6. Wear Resistant
7. Dielectric
8. Weatherproof
| Property | Unit | Value |
| Density | g/cm3 | 0.92-0.96 |
| Average molecular weight | g/mol | 3million-10million |
| Tensile strength(23ºC in air) | MPa | 22 |
| Breaking strength | Mpa | 42 |
| Tensile strain at break | % | 600 |
| Charpy impact strength(notched) | mJ/mm2 | No break |
| Ball indentation hardness | N/mm2 | 42 |
| Shore D hardness | -- | 65-70 |
| Abrasion | % | 70-80,steel=100 |
| Static Friction Coefficient | -- | ≤0.16 |
| Kinetic Friction Coefficient | -- | ≤0.01 |
| Water Absorption | -- | NIL |
| Elongation at break at 23 degress | % | ≥300 |
| Temperature resistance | ºC | -269 to +85 |
| Melt Temperature | ºC | 130-140 |
UHMWPE Application Areas
1. Textile Industry:
2. Chemical Industry:
3. Food Processing Industry:
4. Paper Industry:
5. Material Handling:
6. Farm Implement:
7. Mining & Metals Processing Industries:
We offer excellent sliding properties and abrasion/wear resistance due to its low coefficient of friction. HDPE Sheet is very tough and impact resistant, even at low temperatures, it is lightweight, easy to weld but difficult to bond. As a thermoplastic sheet manufacturer in China, Abosn can supply both single color and Dual-color HDPE sheets to suit customer demands. We own the most advanced Extrusion machines to extrude HDPE sheets with fixed material under certain pressure and temperature. HDPE Sheet has an almost waxy feel to it and is pretty good at being a low friction wear strip material and is used probably more than any other plastic as a wear strip on conveyors or production lines of huge companies. While it is difficult to bond effectively to anything, which means that HDPE Sheet will need to be physically or mechanically fixed in place using screws etc.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}