| Customization: | Available |
|---|---|
| Material: | PE |
| Kind: | Color Plastic Sheet |
|
Still deciding? Get samples of US$ 5/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Avoids the damage to the belt through the contact between the bar and surface of belt.
2.The conveyor belt is stressed evenly in the loading area, which will reduce the daily maintenance cost.
3.Effectively eliminate the spillage or scattering of the material caused by unequality of the stress on the belt.
4.The UHMW polyethylene surface has outstanding sliding properties.
5.Arc surface of polyethylene enables the conveyor belt to running smoothly.
6.Ultra elastic rubber absorb the impact in the maximum.
7.Each part of the impact bar is closely jointed by hot vulcanization. Fastening device has different tightening points along the bar and make the joining strong and reliable, easy to install and remove.
UHMWPE conveyor impact bar
UHMWPE conveyor sliding bar
UHMWPE conveyor impact bed surface sliding panel
UHMWPE bar
UHMWPE impact sliding bar
| project | unit | Test Methods | index | |
General Physical Properties |
molecular weight | X10 | GB184-80ASTMD4020-81 | 50-1080 |
| density | g/cm3 | GB1033-86 | 0.93-0.98 | |
| Volatile matter (moisture) | % | GB2914-82 | ≤0.15 | |
| Izod impact strength | KJ/m2 | GB1843-80 | not broken | |
| impact strength of beam | KJ/m2 | GB1043-86 | 80-130 | |
| Tensile breaking strength | Mpa | GB1040-79 | 25-40 | |
| Tensile elongation at break | % | GB1040-79 | 50-600 | |
| thermal performance | Melting point | ºC | ASTMD 2117 | 136 |
| Vicat softening point | ºC | ASTMD 2117 | 80 | |
| embrittlement temperature | ºC | ASTMD1525 | ≤-70 | |
| Linear expansion coefficient | 10-5/ºC | ASTMD 696 | 0.15 | |
| Thermal deformation temperature 0.45Mpa | ºC | ASTMD 648 | 110 | |
| Electric energy | volume resistivity | ASTMD 257 | 1017~ 1018 | |
| Dielectric strength | KV/mm | ASTMD 149 | 50 | |
| Dielectric constant | 106Hz | ASTMD 150 | 2.30 | |
| Dielectric loss tangent | 106Hz | ASTMD 150 | ≤5×10-4 |
Established in 1998,Abosn New Material Chemical Co.,Ltd. is one of the largest Engineering Plastic products manufacture in China.All the stuff in our company are dedicated to producing satisfying products and developing new products for our customer. We have gained many certificates from government and professional fields .We have a wide variety of products, mainly including all kinds of UHMW-PE Fender Pad ,UHMW-PE Sheet ,HDPE Sheet ,PP Sheet ,Urethane Sheet ,PVC sheet and other Engineering plastic products. Our products are widely applied on electric fields ,wharf and port ,mining ,chemical plant and so on which bring a lot of social benefits and economic benefits .Now they are popular all over the world. We always share the things "Quality first, Customer first ,keeping improving " to win more benefits for our customer. In order to achieving rapid and sustainable development, we are willing to establish a wide and deep cooperation relation with enterprises both home and abroad.
We offer excellent sliding properties and abrasion/wear resistance due to its low coefficient of friction. HDPE Sheet is very tough and impact resistant, even at low temperatures, it is lightweight, easy to weld but difficult to bond. As a thermoplastic sheet manufacturer in China, Abosn can supply both single color and Dual-color HDPE sheets to suit customer demands. We own the most advanced Extrusion machines to extrude HDPE sheets with fixed material under certain pressure and temperature. HDPE Sheet has an almost waxy feel to it and is pretty good at being a low friction wear strip material and is used probably more than any other plastic as a wear strip on conveyors or production lines of huge companies. While it is difficult to bond effectively to anything, which means that HDPE Sheet will need to be physically or mechanically fixed in place using screws etc.
){kind=link}