| After-sales Service: | Support After-Sales |
|---|---|
| Warranty: | 1-3 Years |
| Material: | PE |
| Kind: | Color Plastic Sheet |
| Water Absorption: | ＜0.01% |
| Contraction Percentage: | ＜0.4% |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
1.Best shock resistance even in low temperature
2.Low frictional factor, and well sliding bearing material
3.Lubricity (no caking, in adhesion)
4.Best chemical corrosion resistance and stress craze resistance
5.Excellent machinery process ability
6.Lowest water absorption
7.Paragon electric insulativity and anti-static behavior
8.Nice high energy radioactive resistanc
9.Abrasive resistance which always have in thermoelectricity polymer
10.Density is lower than other thermoplastic
UHMWPE material has exceptionally low coefficient of friction offering superb sliding properties and is one of the best plastics for wear/abrasion resistance meanwhile tough and impact resistant even at cryogenic temperatures. As a result, it is definite that UHMW polyethylene is a wonderful engineering plastic that can solve many problems that other engineering plastics cannot.
| Property | Unit | Value |
| Density | g/cm3 | 0.92-0.96 |
| Average molecular weight | g/mol | 3million-10million |
| Tensile strength(23ºC in air) | MPa | 22 |
| Breaking strength | Mpa | 42 |
| Tensile strain at break | % | 600 |
| Charpy impact strength(notched) | mJ/mm2 | No break |
| Ball indentation hardness | N/mm2 | 42 |
| Shore D hardness | -- | 65-70 |
| Abrasion | % | 70-80,steel=100 |
| Static Friction Coefficient | -- | ≤0.16 |
| Kinetic Friction Coefficient | -- | ≤0.01 |
| Water Absorption | -- | NIL |
| Elongation at break at 23 degress | % | ≥300 |
| Temperature resistance | ºC | -269 to +85 |
| Melt Temperature | ºC | 130-140 |
We offer excellent sliding properties and abrasion/wear resistance due to its low coefficient of friction. HDPE Sheet is very tough and impact resistant, even at low temperatures, it is lightweight, easy to weld but difficult to bond. As a thermoplastic sheet manufacturer in China, Abosn can supply both single color and Dual-color HDPE sheets to suit customer demands. We own the most advanced Extrusion machines to extrude HDPE sheets with fixed material under certain pressure and temperature. HDPE Sheet has an almost waxy feel to it and is pretty good at being a low friction wear strip material and is used probably more than any other plastic as a wear strip on conveyors or production lines of huge companies. While it is difficult to bond effectively to anything, which means that HDPE Sheet will need to be physically or mechanically fixed in place using screws etc.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}